Jasic MIG250P - 6.2. Back Panel and Button Descriptions

11
Picture 2 Back panel
6.2. Panel description
6.2.1. Button description
Picture 1-1 Welding modes selecting zone
Welding modes indicator and selection button are
included.
Four welding modes including lift TIG, MIG/MAG,
pulse MIG/MAG and MMA can be selected by
pressing the selection button. Corresponding
indicator will be on according to selected welding
mode.
Picture 1-2 Base metals selecting zone
Base metals indicator and selection button are
included.
Base metals including carbon steel, stainless steel,
aluminum-silicon alloy and aluminum-magnesium
alloy can be selected by pressing the selection
button. Corresponding indicator will be on
according to selected base metal.
Note: This function is unavailable for lift TIG
and MMA.
No.
Component
name
Component function
1
Power switch
Switch power on and off
2
Power cord
Connected to external
junction box
3
Heater power
socket
Connected to heating
plug of gas meter
4
Gas valve
To control gas input
5
Fan
Heat dissipation for
welder inside