Sewage (black) tank preparation
1. Release one to two quarts (1 or 2 liters) of water into the toilet bowl.
2. Follow the directions on your (approved RV) toilet chemical bottle (customer
supplied), by placing the recommended quantity of holding tank chemical into the
toilet bowl.
3. Flush the toilet and allow at least two gallons (8 liters) of water to flow into the
holding tank.
Waste (grey) holding tank preparation
No special preparation is required; however, placing a small quantity of chemicals into this
tank (such as baking soda or an approved RV chemical) will reduce odors from food
particles in the system.
Cleaning & Maintenance
The toilet should be cleaned regularly for maximum sanitation and operational efficiency.
For more information
Refer to the manufacturer’s operator manual. If you have further questions consult your
RV dealer, the manufacturer or Customer Service.
CAUTION
Do not use chlorine (undiluted) or caustic chemicals, such as laundry bleach or drain
opening types, in the toilet system. These products damage the seals in toilets and
To Next Page
Loading...
Need help?
General
