SECONDARY MEANS OF ESCAPE (EXIT WINDOW)
Your recreation vehicle has been equipped with a window(s) that serves as a secondary
means of escape. The window(s) will allow a quick exit from the vehicle during an
emergency if access to the main entrance door is not available. Its red latches and label
easily identify it.
Do not remove the label listed below from its location at the exit window:
Exit Window Label
When parking your recreation vehicle, make sure the egress window is not blocked by
trees or other obstacles. Make sure the ground below the window is solid and can be used
as an escape path.
Practice opening the window before an emergency occurs, and make sure all occupants
know how to operate it:
The egress window(s) must be locked during transit.
Your recreation vehicle may be equipped with one of the following exit window styles.
Flip latch style: (2 per window)
Push up on the front lip of the latch (upper arrow) and the
latch unfolds.
Push up on the front lip of the latch again (lower arrow) to
unhook the latch from the window.
When both latches are unhooked, push out on the window
which is hinged at the top. Exit the vehicle.
The screen does not need to be removed from the window.
Slider window latch style:
Pull the lever down to unlock the window. Slide
the window to the right to open and exit the
vehicle. The screen does not need to be removed
from the window.
Lever style latch:
Remove the screen by pulling the red tab (upper right
arrow). Pull the lever out from the sash clamps. Swing
the lever out so it is positioned straight out from the
window. Push the lever (and window) out to open and
exit the vehicle.
To Next Page
Loading...
Need help?
General
