NOTE: If the bed does not close easily, inspect the bed cushion from the sides
looking for obstructions. Once the obstruction is located, lower the bed board, correct
the obstruction and try again.
10. Place the bed bow brace inside the folded front bed mat.
11. Place the front bed mat against the closed front bed platform. Secure it in place by
hooking the canvas straps to the D-ring hasp located above the bed shelf. You may
need to adjust the straps to assure the mat is firmly secure against the bed platform
Side Bed (if so equipped)
Repeat steps 1 -9.
10. Place the side bed bow brace in the folded FRONT bed mat for storage.
Rear Bed
Repeat steps 1 -9.
10. Place the rear bed bow brace in the folded FRONT bed mat for storage.
Store the bunk mat between bed platform and the interior wall. You will need to slide one
end in first and bend the mat to secure it in place.
CAUTION
Heated bed mats (if so equipped) should not be stored between the wall and bed
platform. Storing them in a tight space or in a twist or bind may result in damage to
the heating elements. See Section 12; Heated Bed Mats for more information.
To Next Page
Loading...
Need help?
General
