CLASS C MOTOR HOME SECTION 10 - APPLIANCES
10 - 3
The BBQ grill is for use outside of the motor home. Never use this grill inside a
compartment or the motor home. Before operating the BBQ grill, make sure that
it is securely placed on the support bracket. The BBQ grill must be COMPLETELY
cooled before storing to avoid damaging the carrying case (if so equipped) and
causing injury from handling the grill when it is hot. Wait until the grill is completely
cooled, then store it.
Attaching the “quick coupler” connection
The “quick coupler” is directly connected to the RV propane system. The “quick-
coupler” connection has a positive shut-off valve as required by code and
standards.
1. Place the “quick coupler handle in the OFF position and push back the sleeve.
The valve handle must be OFF to make the connection.
2. Insert the plug and release the sleeve.
3. Push the plug until the sleeve snaps forward, locking the plug into the socket.
4. Turn the handle ON to allow propane to flow to the drop in stove.
Fig. 10.1 Quick connect coupler
BBQ Grill Prep (if so equipped)
Your RV is equipped with a propane “quick-coupler” connection and support
bracket for easy installation of the BBQ grill
.
W
ATER HEATER – SEE PLUMBING SECTION
To Next Page
Loading...
Need help?
General
