115
at the front of the sofa seat bottom out towards you rmly and gently. To convert the hide-a-
bed back into the upright sofa position, reverse the process (make sure to pull the seat belts
out into their usable positions). Be sure to hold the sofa strap rmly to ensure the hide-a-bed
sofa does not suddenly drop shut. Refer to the furniture manufacturer’s care instructions for
this product.
The easy bed sofa should comfortably seat two to three adults. It converts to a bed by lifting
at the front of the sofa seat section and pulling it towards you. The sofa back will follow and
pivot down into a horizontal position. To reconvert back to an upright sofa, reverse the pro-
cess (make sure to pull the seat belts out into their usable positions). Refer to the furniture
manufacturer’s care instructions for this product.
The trifold sofa oers very similar features to a traditional hide-a-bed. The following illus-
trations detail converting the sofa into a bed.
1. Remove the tri-fold sofa pillows and set aside.
2. Using the strap handle, pull the sleeping surface up, then out.
3. While sleeping surface is up, fold out legs. Extend the sleeping surface until grounded.
4. Once sleeping surface is grounded, fold head board down at.
Depending on your model, the dinette table can be extended by standing at the end of the
table, rmly holding both sides of the table, and pulling the table towards you. To return the
table to the stowed position, reverse this process pushing it in until the table locks in place.
The booth dinette can be converted to a bed by lowering the tabletop to make the bed base.
Remove the cushions from the dinette.
Grasp the table top at the rounded end, and lift the rounded end up at an angle (A).
The table top will separate from the bracket attached to the wall.
Pull the table top away from the wall, toward you slightly.
To Next Page
Loading...
Need help?
General
