- 15 -
No particular maintenance is required for the logic circuit board.
Check the door at least twice a year if it is properly balanced, and all working parts are in good
working condition.
Check the reversing sensitivity and adjust if it is necessary.
Make sure that the safety devices are working effectively (photo beams, etc.)
Notice: An inadequately maintained door can affect the life of the automatic opener due to incorrect loads, and
will void the warranty.
Final notes
This manual is only used by technical persons who are qualified to carry out the installation.
It is important for the installer to show their clients correct operation using of the opener including the using of manual
disengagement cord.
Inform the owner about the need of a regular and accurate maintenance, especially regarding a regular check of
the safety and reversing devices.
Important information for the user
Once the opener has been installed, the user must be informed about how it works and all the risks that can arise if it is
used improperly. The user must avoid placing himself/herself in dangerous situations such as standing within the door’s
operating range when it is moving.
Do not let children play near the door, and keep the remote controls out of their reach.
All services, repairs or checks must be carried out by professionally qualified persons, and noted on a maintenance
register kept by the user.
IMPORTANT NOTE: In the case of a malfunction the user must call an authorized installer and should not attempt to
repair it by yourself.
To Next Page
Loading...
