Jazz DV140 - Photo Resolution Settings; Self Timer Configuration

12
NOTE: Please note that recorded video and images appear narrower on recorder LCD
screen than actual recorded scene.
Changing the resolution setting of photo
1. Press OK key to open the menu.
2. Press Up or Down Direction key to select ‘Resolution’ option.
3. Press Right Direction key.
4. Press Up or Down Direction key to select the required resolution setting: VGA (640 x
480) or other option shown.
5. Press OK key to confirm the selection. Then press OK key to exit the menu.
Self Timer
There are two methods to set Self Timer mode:
Method 1: Press OK key to open the menu. Then press Up or Down Direction key to
select ‘Driver Mode’ option. Press Right Direction key and a sub-menu will appear on
LCD screen. Press Up or Down direction key to select ‘2 sec delay self timer’ or ’10 sec
delay self-timer’ option on the sub-menu. Then press OK key to confirm the selection.
Press OK key again to exit the menu. A ‘2 sec delay self timer’ or ’10 sec delay self timer’
icon will be displayed on LCD screen.
Method 2: Press Left Direction key and a ’10 sec delay self timer’ icon will appear on LCD
screen. (Note: Only 10 sec delay self timer mode can be set by Method 2).