20
7. Select ‘Start-up Ima’ option by pressing Up or Down Direction key.
8. Press Right Direction key. A sub-menu appears on LCD screen.
9. Select ‘My Image’ option by pressing Up or Down Direction key. Then press
OK key to confirm.
10. Press OK key again to exit the Setup Menu.
11. Press the Power key to turn off the recorder.
12. Press the Power key to turn on the recorder. The photo you select will display
on LCD screen as the start-up image.
To Disable the start-up image, select the ‘Start-up Ima’ option in the Setup Menu and
then select ‘Off’ option. After turning the recorder off and on again, the start-up
screen will be blank.
To reset the start-up image to default setting, select the ‘Start-up Ima’ option in the
Setup Menu and then select ‘System’ option. After turning the recorder off and on
again, the default start-up screen will be displayed. Alternatively, select ‘Reset All’
option in the Setup Menu. Confirm Reset All function by selecting ‘Yes’ option in the
sub-menu.
To Next Page
