JB-Lighting P7 - Installation and Connectivity; Power Cord Installation

P7
- 32 -
The P7 is supplied with a power cable with a Neutrik PowerCon connector. Install a 3-prong
grounding type plug that ts your supply. US model comes only with PowerCon connector. Con-
nected load: voltage 100-240 V, frequency 50 - 60 Hz
Connection in Germany / Europe:
Color Function Symbol
brown live „L“
blue neutral „N“
green/yellow ground „PE“
4. Installation
3.2 Unpacking
This package contains the P7, two omega brackets with 1/4 turn fasteners, as well as a power
cable with PowerCon connector (no cable in US model, only PowerCon connector). This man-
ual is included 1 time per shipment. Open the top of the box and remove the inlay. Remove the
unit from the box. For any damage occurring during transport, report to the transport company
immediately.
WARNING: To ensure proper installation of the plug consult a qualied technician!
!
4.1 Installing a plug on the power cord
Operate the device only after having familiarized with its functions. Do not permit operation by
persons not qualied for operating the device. Most damages are the result of unprofessional
operation!
Please use the original packaging or special designed ight cases if the device is to be trans-
ported.
WARNING: The lamp has to be replaced when it is damaged or deformed due to the
heat!
WARNING: To avoid damage of the internal parts of the xture head, never let the
sunlight lights directly to the front lens, even when the xture is not working!
!
!