P7
- 46 -
22 27 22 Frost random snap in / ramp out (fast to slow)
Aperture for logo projection
240-254
255-255
23 28 23 Macro
Macro off
Macro 001 - Macro 255
000-000
001-255
24 29 Pan/Tilt Speed
Effects in real time
Effects delayed (fast to slow)
000-003
004-255
25 30 Effect speed
Effects in real time
Effects delayed (fast to slow)
000-003
004-255
26 31 24 Blackout Move
No function
Blackout at pan/tilt
Blackout at gobo, color, prism, CMY, iris, frost
Blackout at gobo, color, prism, CMY, iris, frost, zoom, focus
Blackout at gobo, color, prism, CMY, iris, frost, pan/tilt
Blackout at gobo, color, prism, CMY, iris, frost, zoom, focus, pan/tilt
000-095
096-127
128-159
160-191
192-223
224-255
In order to adapt the response of the P7 during using faders at lighting controllers from different
manufacturers, this can be set via this channel. DMX 000 is set for slow dimming off and DMX
007 for faster dimming off. This area is repeated 5 times and thus the P7 is adapted to the re-
sponse time / speed of lighting controllers (DMX 000-007 for „fast“ light controllers and DMX
128-135 for „slow“ light controllers).
Also the Camera mode 50/60/600Hz can be selected and a general reset of the xture can be
invoked.
DMX 208-215 for min. 2 seconds switches to Camera Mode, 50Hz
DMX 216-223 for min. 2 seconds switches to Camera Mode, 60Hz
DMX 224-231 for min. 2 seconds switches to Camera Mode, FLEX 600Hz
DMX 240-247 for min. 2 seconds invokes a reset of the xture
After this DMX commands please re-set back to it‘s initial value (for example DMX 255). More
information see DMX chart on page 42.
6.3 Control channel
In conjunction with the focus with this channel can be jitter generated. Depending on the inten-
sity of the channel, the gure is more or less excited to tremble. This effect can be dimmed or
switched)
6.4 Sparkle effect, sparkle effect speed
To Next Page
Loading...