JBL ESC333 - Technical Specifications; Power Output and Noise Ratio; Input and Sensitivity Specifications

-15-
Specifications
ESC333 System
Power Output
Satellites:
35 Watts x 5 @ 0.1% THD
Subwoofer:
65 Watts x 1 @ 0.1% THD
Signal-to-Noise Ratio
90 dBA
Input Impedance
(analog inputs)
20k ohms
Input Sensitivity
(analog inputs)
400mV
Auto Turn-On Sensitivity
(analog inputs)
2mV
Frequency Response (–6 dB)
35Hz – 20kHz
Dimensions (H x W x D)
Satellites (each):
4-3/8 x 3-3/16 x 3-3/4 inches
111 x 81 x 95mm
Subwoofer:
15-1/8 x 13 x 14-1/2 inches
384 x 330 x 368mm
Occasional refinements may
be made to existing products
without notice, but will
always meet or exceed original
specifications unless otherwise
stated.
ESC333 Simply Cinema OM 5/24/00 12:17 PM Page 15