JBL Infinity User Manual

JBL/Infinity Soundbar Quick-Start Guide
IMPORTANT:Thisquick‐startguidecontainsinformationaboutassembling,mountingand
connectingyoursoundbar.Forcompleteinstallation,connection,setupandoperation
information,downloadthefull[Soundbar]UserManualat[jbl.com][infinitysystems.com].
Includeditems
2xsoundbarspeakersections(left&right)
1xthreadedrod
2xmountingbracketbaseassemblies
2xmountingbrackettops
8xlongmountingbracketscrews
8xshortmountingbracketscrews 
2xbridgeplates
8xbridgeplatescrews
1xlargehexwrench
1x
smallhexwrench
2xsafetywireassemblies
2xhigh‐levelaudioadapters
1xAVRCPremotecontrolandbattery
1xquick‐startguide
1xsafetyinstructionbooklet
Assembly
1.Hand‐tightenthethreadedrodintothesoundbar’sleftspeakersection(withthecableattached).
[Insertillustration“Assembly_1_082316.ai”]

2.Screwthesoundbar’srightspeakersectionontotheportion ofthethreadedrodthatisprotruding
fromtheleftspeaker.Whenthespeakeristhreadedallthewayontothe
rodthefrontsofbothspeakers
shouldbeproperlyaligned. 
[Insertillustration:“Assembly_2_082316.ai”]

JBL Infinity Specifications

General

Brand	JBL
Model	Infinity
Category	Speakers
Language	English

Summary

Soundbar Assembly

Connecting Speaker Sections and Bridge Plates

Joins left and right speaker sections and secures with bridge plates.

Configuring Control Panel Settings

Sets input level, auto turn-on, and gain controls for the soundbar.

Final Assembly Attachment

Attaches the rear bridge plate to complete the soundbar structure.

Mounting the Soundbar

Installing Mounting Brackets

Inserts and slides mounting bracket bases into the soundbar tracks.

Positioning and Securing the Unit

Places the soundbar and tightens mounting bracket adjustment screws.

Installing Safety Harnesses

Attaches the safety harness assemblies for secure installation.

Connections

Ground, Power, Illumination, and Remote Wiring

Connects the soundbar's power, ground, illumination, and remote turn-on wires.

Audio Input Connections

Connects audio sources like head units, phones, or subwoofers.

Audio Output Connections

Connects the soundbar to a subwoofer or secondary amplifier.

Specifications