Need help?Do you have a question about the JBL LSR4328P and is the answer not in the manual?
Details the meaning of graphic symbols used in the manual to alert users to important information and potential hazards.
Describes the technology for automatically analyzing and correcting room acoustics for accurate low-frequency response.
Details how to initiate, bypass, or reactivate the Room Mode Correction calibration process.
Describes digital audio connectors, HiQnet, USB, DIP switches, active input display, and power connector.
Explains how to network speakers using HiQnet and configure speaker ID with DIP switches.
Explains digital audio formats (AES/EBU, S/PDIF), supported sample rates, and channel reproduction based on DIP switch settings.
Provides guidance on when RMC calibration should be performed, such as after relocation or acoustic changes.
Explains the procedure to reset all user settings and recall factory EQ presets using DIP switches.
Describes the capabilities of the software for system control, parameter adjustment, and configuration management.
To Next Page
General
