9
Reference
Overview
LSR4328P/4326P Front LSR4328P/4326P Rear
Front Panel
LSR4328P/4326P Front Panel
The controls and displays on the front panel of the LSR4300 allow you to adjust and view
various speaker settings. Below is a listing and description of each.
1. Power Indicator – The JBL logo lights at different levels. It is illuminated dimly
whenever the LSR4300 is connected to an AC power source, indicating the speaker is in
“standby” status. It is illuminated at full brightness when the speaker is powered up and
active. Full brightness level is variable set using the brightness level function on the
front panel, remote control or LSR4300 Control Center Software. The JBL logo flashes to
indicate the following conditions: DIM function is engaged using the Remote Control, or
LSR4300 Control Center Software. MUTE function is engaged using LSR4300 Control
Center Software. Commands directed to the LSR4312SP Subwoofer are being received.
Reference - Overview/Front Panel
To Next Page
Loading...
Need help?
General
