To Next PageTo Next PageWhat to do if JBL Speaker System center speaker has no sound?
If there is no sound coming from the center speaker of your JBL Speaker System, check all the wires and connections between the receiver/amplifier and the speaker. Make sure that all wires are connected properly and none of the speaker wires are frayed, cut, or punctured. Also, ensure that the receiver/processor is configured to enable the center speaker.
Why is there no sound from my JBL Performance PT800 surround speakers?
If your JBL Speaker System surround speakers aren't producing sound, first, check all the wire connections between the receiver/amplifier and the speakers, ensuring that the wires are properly connected and not frayed, cut, or punctured. Then, review the proper operation of your receiver/amplifier and its surround sound features.
How to fix JBL Performance PT800 when one speaker has no sound?
If your JBL Speaker System has no sound coming from one speaker, start by inspecting all wires and connections between the receiver/amplifier and the speakers to ensure they are correctly connected and not frayed, cut, or punctured. Also, if you are using Dolby Digital or DTS modes, verify that your receiver/processor is configured to enable the speaker in question.
General| Brand | JBL |
|---|---|
| Model | Performance Series PT800 |
| Category | Speaker System |
| Language | English |
States the objective of bringing live performance sound to the home.
Details the modular system components: PS1400 subwoofer, PT800 tower, PC600 center.
Visuals and names of the included speaker modules: PC600, PT800, PS1400.
Lists accessories provided with the PS1400, PT800, and PC600 speakers.
Guidance for positioning front, center, and surround speakers in a 5.1 setup.
Placement advice for 6.1 and 7.1 surround sound configurations.
Step-by-step instructions for stacking the PT800 on the PS1400 for an integrated system.
Instructions and safety notes for wall-mounting speakers.
Guidance for mounting the PT800 speaker in a corner using optional kits.
Explains PS1400 controls: On/Auto, Crossover, LF Level, and Polarity.
Details speaker wire connections, polarity, and system input types.
Configuration for stacked system using speaker-level input to PS1400.
Configuration for stacked system with LFE and speaker-level inputs to PS1400.
Configuration for stacked system with LFE input and external crossover for PT800.
Configuration for separated system with LFE input and external crossover for PT800.
Steps to diagnose and resolve no sound from any or specific speakers.
Diagnosing issues like low volume shutdown or lack of bass output.
Troubleshooting problems with surround sound playback and settings.
