Remove the Rubber Plugs.
Remove the Rubber Plugs.
Tighten the 2 X M5 Mounting Screws (included)
on the soundbar.
Wall Mount Procedure
Tighten the bracket on the wall using 4 X M4 screws (the
distance between two brackets should be 406mm (16 inches)).
There is a gap in the rubber surrounding the screws.
Ensure this gap is facing upwards, and then slide the
secured Mounting Screws onto the Mounting Brackets.
NOTE: For further security, an optional security strap can be attached to the soundbar.
Table Mount Procedure
Tighten the bracket on the table
using 4 X M4 screws (the distance
between two brackets should be
406mm (16 inches)).
Tighten the 2 X M5 Mounting Screws (included)
on the soundbar.
There is a gap in the rubber surrounding the screws.
Ensure this gap is facing upwards, and then slide the
secured Mounting Screws onto the Mounting Brackets.
To Next Page
Loading...
Need help?
General
