Page 3
PSB-1 Owner's Manual
Volume Control Schemes
INTEGRATION WITH A FIXED OUTPUT TV
If your TV does not support variable audio output, we recommend using the soundbar as follows:
1. Program the remote's volume buttons to control
the soundbar.
2. On the back of the soundbar, select "Fixed
Source".
3. Within the TV's on-screen menu, make one
simple change:
a. Disable internal speaker (recommended
for best sound)
As the diagram above implies, the end-user makes volume adjustments directly to the soundbar (which indicates volume
via 10 front panel LEDs). Compared to the previous system, this requires a slightly longer setup time, because a remote
(or the soundbar itself—see "Programming the Soundbar to Respond to Any Remote" on page 9) requires IR code
programming. That being said, this system is still simple, reliable, and easily installed.