Generally, bass output will increase as the speaker is moved closer to a wall or corner.
For the best performance, we recommend that you place the speakers at least 20 inches (51cm) away
from the side walls.
Position Studio 530 bookshelf speakers so that the centers of their horns are approximately at ear
level. Peel the
adhesive rubber feet from the card and apply them to the bottoms of the speakers.
Using the Supplied Spikes (Studio 590/Studio 580/Studio 570)
Four metal spikes are supplied for use when you place the speaker on a carpeted surface. Using the
spikes decouples the speaker from the floor and prevents unwanted acoustic damping.
To insert the spikes:
1. Gently lay the speaker on its side (not its front or back) on a soft, nonabrasive surface.
2. Unscrew and remove the rubber bumpers from the speaker’s feet.
3. Screw each spike into the threaded insert in each foot. Make sure all four spikes are screwed in
To Next Page
Loading...
Need help?
General
