EasyManua.ls Logo

JBL VT4888DP-AN User Manual

JBL VT4888DP-AN
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
08-12
JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL VT4888DP-AN/CN/DA
REV R
PACKAGE
Technical Manual
JBL VT4888DP-AN/CN/DA
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
DP3 Internal Amplification 6000W Peak, 3000W Continuous
Output (at nominal load):
• DP3 Output Section: 3-Channel Class-I
Output (at nominal load): LF: 118V peak, MF: 118V peak,
HF: 118V peak
Frequency Response: 60 Hz- 16 kHz (±3 dB)
Frequency Range: 48 Hz -18 kHz (-10 dB)
Max Peak Output: 139 dB SPL, 1m
Output (at nominal load): LF: 118V peak, MF: 118V peak,
HF: 118V peak
Signal Processing: DSP based, resident in Input Module
AC Power Operating Auto Select 90-132VAC/216-264VAC,
Range: 50/60 Hz
• AC Line Voltage: 50/60 Hz, Auto-Detect;120V/240V
(-15%, +10%)
• AC Current Requirement: 6A per system at 120V, 3A per system
at 240V
Horiz Coverage Angle: 90°, 250 Hz - 16 kHz (-6dB)
Vert Coverage Angle: Varies with size and configuration(-6dB)
Crossover Frequency: 315 Hz LF/Mid
1.2 kHz MF/HF
SYSTEMS COMPONENTS:
• Cabinet: Enclosure Assembly C4888
Grille: Left (350780-002) , Right (350780-001)
• Low Frequency (2) 2262H, 304 mm (12”) dia., 76 mm (3”)
Transducer: Dual Coil, Neodymium, Differential Drive
Direct Cooled
Bandpass Nominal 4 ohms (wired in parallel)
SYSTEMS COMPONENTS (Cont):
DC Resistance: 5.1 Ohms
Mid Frequency (4) 2106HPL, 136 mm (5.5”) with 50 mm
Transducer: (2”)dia. voice coil
Bandpass Nominal 8 Ohms (wired in parallel)
Impedance:
• DC Resistance: 4.3 Ohms
High Frequency (2) x 2431H, 76 mm (3”) dia. Aluminium
Transducer: Diaphragm, 38mm (1.5”) Throat Dia.
Neodymium Drivers
Bandpass Nominal 8 ohms (wired in series)
Impedance:
• DC Resistance: 4.0 Ohms
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 30mV, 20 Hz to 20 kHz
B. L.F. Woofer Aural Sweep Test (per ets): 6V, 40 Hz to 1 kHz
C. M.F. Woofer Aural Sweep Test (per ets): 3V, 400 Hz to 4 kHz
D. H.F. Driver Aural Sweep Test (per ets): 1.5V, 800 Hz to 20 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 355 mm x 1013 mm x 678 mm D
(14 x 39.9 x 26.7 in. D)
• Net Weight 67.2 (148 lb)
• Shipping Weight 74.0 (163 lb)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Carton
354871-001
Filler (2)
354872-001
Proective Jackets
(2) Drive Pack
360849-001
Microfoam (8)
49790P
Power Cord
355040-002
Spec Sheet
361486-001
Filler, Front
362085-001
JBL
VT4888-AF
Carton
350484-001
Filler (2)
350486-001
Owner’s Manual
350485-001
JBL
VT4888-SF
Carton
350706-001
Filler (2)
350713-001
Owner’s Manual
350485-001
Dolly Assemb
ly
350519-002
Carton
360825-001
Insert (2)
360826-001
Tube (2)
336027-001
Soft Cover
360777-001
910-00035-01 (1)
Ferro fluid vial w/
blotter paper and
instruction sheet
910-00035-02
(12)
Ferro fluid vials w/
blotter paper and
instruction sheet
Warranty 59660
Operators Guide, DBX Module, DP3
360850-002
Question and Answer IconNeed help?

Do you have a question about the JBL VT4888DP-AN and is the answer not in the manual?

JBL VT4888DP-AN Specifications

General IconGeneral
BrandJBL
ModelVT4888DP-AN
CategoryAmplifier
LanguageEnglish

Summary

Technical Specifications

Acoustic & Electrical Specifications

Details sound output, frequency response, and signal processing parameters.

Wiring Diagram

Driver Wiring Connections

Illustrates how high, mid, and low frequency drivers are wired to the input connector.

Schematic Diagrams

Wire Harness Schematic

Details the wiring harness assembly P/N 350989 and its connections.

Input Connection Assembly Schematic

Shows the input connection assembly P/N 350988 and its pin assignments.

DP3 Amplifier Assembly Reference

Related product manuals