jcb 36C-1 - Mechanical Hitch Unlock System; Steps

14
14 | P l e a s e s e e o p e r a t o r m a n u a l f o r f u l l d e t a i l s .
1. Park machine on solid, level ground
1.1. Release the two track levers
1.2. Set handle throttle lever to idle
position
2. Lower the dozer blade (B)
3. Lower excavator so attachment is flat
on ground (A)
4. Stop the engine
5. Discharge the hydraulic pressure
6. Isolate controls and remove ignition
key
7. Isolate battery to prevent accidental
operation of the engine
Mechanical Hitch Unlock System
Maintenance Position