Need help?Do you have a question about the jcb 19C-1E and is the answer not in the manual?
General| Battery Type | Manganese laminated Lithium-ion |
|---|---|
| Battery Rated Capacity | 14.8 kWh (3 Pack) 19.8 kWh (4 Pack) |
| Charging | On-board charger with direct connection from AC mains power supply |
| Charging Time | 110V – 12 hrs 230V – 8 hrs |
| Fast Charging (Optional) | Off-board charger, with connection to 415V 3-Phase supply Charging time <2 hrs |
| System Voltage | 48V |
| Motor Type | AC permanent magnet |
| Motor Power | 7 kW continuous 20kW peak |
| Operating Modes | L – 1200rpm G – 1600rpm H – 1800rpm Auto Kick Up – 2300rpm, 2 speed tracking only |
| Thermal Limitations | Operation: -10oC to +46oC Charging: -10oC to +40oC |
Emphasizes that machine safety depends on correct operation and maintenance.
Explains the meaning of signal words (DANGER, WARNING, CAUTION, Notice) used in safety notices.
Covers training, care, alertness, clothing, alcohol/drugs, feeling unwell, mobile phones, and modifications.
Covers general safety, training, machine condition, limits, worksites, communications, parking, and more.
Details hazards and precautions for working on sites, including buried pipes and cables.
Highlights the responsibility for risk assessment, considering personnel, machine, load, and worksite factors.
Step-by-step guide on how to fasten and check the inertia reel seat belt.
Procedure for warming up hydraulic oil and circuits in low temperatures.
Details on how to isolate hydraulic controls to prevent accidental movement.
Recommendations for safe driving on slopes, including speed and positioning.
Explanation of ISO/SAE control patterns and how to select them.
Procedure for operating the dozer blade using a single control lever.
Safety notices and procedures for operating auxiliary circuits with attachments.
How to use and understand the overload warning system for object handling.
Procedure for lifting operations, including overload warning and sling checks.
Techniques for dozing and grading, including site preparation and traction.
Instructions on how to use the fire extinguisher safely and effectively.
Procedure for emergency operation of the excavator end using stored hydraulic pressure.
Step-by-step guide for securely loading the machine onto a transport vehicle.
Procedure for safely unloading the machine from a transport vehicle.
General advice on using JCB approved attachments and safety precautions.
Procedures for safely connecting and disconnecting hydraulic hoses.
Essential do's and don'ts for connecting and disconnecting quick release couplings.
General safety, installation, and removal procedures for the excavator end quickhitch.
Steps to prepare the machine for storage, including cleaning and greasing.
Covers electrical safety, modifications, working under machines, compressed air, and personal protective equipment.
Procedure for placing the machine in a safe maintenance position.
Checking the condition of ROPS/FOPS/FOGS for damage and proper mounting.
Checking the condition and operation of the seat belt and its mounting.
Safety warnings for discharging hydraulic pressure and precautions for the filler cap.
Table of digging dimensions and performance specifications for excavator end.
Ways to minimize exposure to vibration through machine selection and operation.
To Next Page
