About the Product
Console Switches
Console Switches
General
Figure 11.
Table 4.
A Control isolation solenoid on/
off switch
When the LED (Light Emitting Diode) is illuminated the hydraulics are
active.
B Aux1 selection switch Illuminates when single acting or double acting system is selected.
C Lift overload switch Illuminates when lift overload capacities is exceeded, remove the ex-
cess load and press the switch to silence the buzzer.
D Worklights on/off switch LED illumination: 1= Front on, 2= Rear on
E Wiper/washer on Not used
F Auto-hydraulic warming switch Not used
G H+ mode selection switch Not used
H Aux2 selection switch No LED illumination
J Auto Idle on/off switch Illuminates when machine is turned on. Press the switch to deselect
the auto idle mode.
18 9831/8250-4 18
JCB © Admin Pimteam - 23/06/2021 05:32.
To Next Page
Loading...
