Preservation and Storage
Storage
3. Start the motor.
4. Operate the hydraulic controls. Make sure that the hydraulic functions operate correctly.
5. Prepare the machine for storage.
Take out of Storage
1. Clean the machine to remove all unwanted material and corrosive products. Dry the machine to remove
solvents and moisture.
2. Remove the grease or petroleum jelly from the ram piston rods.
3. Check the hydraulic oil level. If necessary, add more oil.
4. Make sure that the batteries are fully charged.
5. Start the motor.
6. Operate the hydraulic controls. Make sure that the hydraulic functions operate correctly.
105 9831/8250-4 105
JCB © Admin Pimteam - 23/06/2021 05:32.
To Next Page
Loading...
