jcb 19C-1E - Retractable Undercarriage Controls

Operation
Operating Levers/Pedals
Figure 39.
A
B
C
A
B
D
A Lower the dozer B Raise the dozer
C Control lever D 2-speed selection button
Retractable Undercarriage Controls
To extend or retract the undercarriage (option):
1. Stop the machine on level ground.
2. Make sure that all persons are away from the machine and the surrounding area.
3. Operate the dozer control lever to lower the dozer blade and lift the tracks just off the ground.
Refer to: Dozer Blade Controls (Page 56).
4. Operate the excavator controls to slew the machine to specified angle.
Angle: 180°
5. Operate the excavator controls to lower the excavator arm and lift the rear of the tracks just off the ground.
Refer to Figure 40.
Figure 40.
6. Operate the track extension control lever to move the undercarriage to the required position. Refer to Figure
41.
6.1. Move the lever upward to retract the undercarriage. Both tracks will retract together.
6.2. Move the lever downward to extend the undercarriage. Both tracks will extend together.
57 9831/8250-4 57
JCB © Admin Pimteam - 23/06/2021 05:32.