jcb 19C-1E User Manual

Operation
Operator Seat
Operator Seat
General
CAUTION Position the seat so that you can comfortably reach the machine controls. Do not adjust the seat
while the machine is moving. You could have an accident if you operate the machine with the seat in the
wrong position.
The operator's seat can be adjusted for your comfort. A correctly adjusted seat will decrease the operator
fatigue.
Adjust the seat so that you can comfortably reach the machine controls.
For driving the machine, adjust the seat so that you can push the pedals fully down when your back is against
the seat back.
Stop using the machine if the operators seat becomes defective. Repair or replace the seat before using the
machine again.
Basic Seat
Figure 15.
A
A Lever (forward and backwards adjustment)
32 9831/8250-4 32
JCB © Admin Pimteam - 23/06/2021 05:32.

jcb 19C-1E Specifications

General

Battery Type	Manganese laminated Lithium-ion
Battery Rated Capacity	14.8 kWh (3 Pack) 19.8 kWh (4 Pack)
Charging	On-board charger with direct connection from AC mains power supply
Charging Time	110V – 12 hrs 230V – 8 hrs
Fast Charging (Optional)	Off-board charger, with connection to 415V 3-Phase supply Charging time <2 hrs
System Voltage	48V
Motor Type	AC permanent magnet
Motor Power	7 kW continuous 20kW peak
Operating Modes	L – 1200rpm G – 1600rpm H – 1800rpm Auto Kick Up – 2300rpm, 2 speed tracking only
Thermal Limitations	Operation: -10oC to +46oC Charging: -10oC to +40oC