Maintenance
Track Gearbox
Track Gearbox
Oil
Check (Level)
1. Park the machine on solid, level ground.
2. Make the machine safe with the excavator lowered.
Refer to: Maintenance Position (Excavator End Lowered) (Page 116).
3. Clean the area around the fill/level plug.
4. Remove the fill/level plug.
5. Make sure that the oil inside the gearbox is level with the fill/level plug.
6. Top up the oil if necessary.
Refer to: Fluids, Lubricants and Capacities (Page 156).
7. Clean the fill/level plug.
8. Install the fill/level plug, make sure it is tight.
Figure 107.
A Fill/Level plug
137 9831/8250-4 137
JCB © Admin Pimteam - 23/06/2021 05:32.
To Next Page
Loading...
