jcb 540-170 - Page 139

Section 3-3 - Routine Maintenance
Service Schedules - Machines with SE Engines
Introduction
3-3-4 3-3-4
9803/3750-05 (3-21-00)
Axle(s) Oil Level - Check

Axle(s) Oil - Change

Hub Oil Level (Without Oil Immersed
Brakes)
- Check

Hub Oil (Without Oil Immersed Brakes)
(9)
- Change

Hub Oil (With Oil Immersed Brakes)
(9)
- Change

Axle Breather(s) - Check

Steering Stops (if fitted) - Security

Wheel Nut Security - Check

Tyre Pressures/Condition - Check

Wheel Alignment - Check

Transmission Strainer - Clean

Drive Shafts and Universal Joints
(10)
- Security and Grease

Axle Pivots and Linkages
(10)
- Grease

HYDRAULICS
Oil Level - Check

Oil
(7)
- Sample, Change

Oil Filter
(11)
- Change

Suction Strainer - Clean

Pilot Filter (if fitted) - Change

BRAKES
Brake System Fluid Level - Check

Brake System Fluid - Change

ELECTRICS
Battery Electrolyte Level (if applicable) - Check

Battery Terminals for Condition and
Tightness
- Check

BODYWORK AND CAB
Lift/Displacement/Tilt/Steer Ram Pivot
Pins
- Grease
 
Extension Ram Piston Rod Pivot Pin - Grease

All Other Pivot Pins - Grease

Fire Extinguisher (if fitted) - Check
 
Wing Mirrors Condition and Security - Check
 
Operation 10 50
100
(1)
500 1000 2000 8000
ProCarManuals.com