jcb JCB-MS-210C - Saw Blade Replacement; Blade Removal and Installation

23
JCB-MS-210C
Instruction & User Manual
Saw blade replacement (Fig. 5)
• Pull out the mains plug.
• Place the saw unit in „cross-cutting“ position
• Unlock the moving saw blade guard (6) by
pressing the release button (3 - Fig. 1); in
the process, raise the saw blade guard so
that the saw blade is free.
• Actuate the spindle lock (30 - Fig. 5).
• Loosen the saw blade flange bolt
flange bolt
(28).
- (Attention: left-handed thread).
• R
out
emove the (28) and saw blade
• Carefully remove the saw blade (risk of in-
jury from the saw blade teeth).
• Place a new saw blade on the inner saw
rotational direction of the saw blade.
•
tighten the screw.
• Move the saw blade guard back to the cor-
rect position.
Fig. 5
29
28
30
6