JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
If damaged, have the power
tool repaired before use.
Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and
clean.
Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier
to control.
g) Use the power tool,
accessories and tool bits
etc. in accordance with these
instructions, taking into account
the working conditions and the
work to be performed.
Use of the
power tool for operations different
from those intended could result
in a hazardous situation.
5. Service
a) Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
RECIPROCATING SAW
SAFETY WARNINGS
1. Hold reciprocating saw by
insulated gripping surfaces, when
performing an operation where
the cutting accessory may contact
hidden wiring or its own cord.
Cutting accessory contacting a
“live” wire may make exposed
metal parts of the power tool “live”
and could give the operator an
electric shock.
ADDITIONAL
SAFETY RULES FOR
RECIPROCATING SAW
1. Always wear a dust mask.
To Next Page
Loading...
Need help?
General
