jcb RTFL 930 - Page 47

Operation
Drive Controls, Switches and Instruments
37 37
9811/5700-7
!MWARNING
Do not drive on the road with the work lights switched
on. You can interfere with other drivers visibility and
cause an accident.
2-2-2-5_1
Beacon
339711-1
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON and OFF positions.
Position 1: OFF
Position 2: ON
Before you operate the switch, refer to Beacon.
Front Work Lights
340100-1
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 2: Outer Work Lights ON
Note: The work lights work independently of the main
lights circuit.
Rear Fog Light (if fitted)
340051-1
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 2: ON
Cab Heater (if fitted)
339681-1
Three position push switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 3: ON - 1st Speed
Position 2: ON - 2nd Speed (if fitted)
Before you operate the switch, refer to Air-
Conditioning and Cab Heater Controls.
Air-Conditioning (if fitted)
339681-1
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 2: ON
Before you operate the switch, refer to Air-
Conditioning and Cab Heater Controls.