Introduction
Safety Labels
18 18
9821-3100-6
Part Numbers and Descriptions
ISO-01A
817-70014-3
Part Number: 817/70014
Description: Warning. Read the
operator manual before you operate
the machine.
ISO-02A
332-S9994-3
Part Number: 332/S9994
Description: Crushing of whole body.
Install the articulation lock before you
start maintenance work or transport
the machine.
ISO-04A
817-70004-4
Part Number: 817/70004
Description: Burns to fingers and
hands. Stay a safe distance away.
ISO-05C
817-70012-2
Part Number: 817/70012
Description: Runover. Start the engine
from the operator seat only. Do not
short across the terminals.
ISO-06A
332-F5855-1
Part Number: 332-F5855
Description: Pressure hazard. Read
operators manual
817/70004
ISO-06C
817-70002-2
Part Number: 817/70002
Description: Pressure hazard. Stop
the engine, remove the starter key
and refer to Releasing the Hydraulic
Pressure (Routine Maintenance
Section) before you start
maintenance work.
ISO-06D
817-70005-3
Part Number: 817/70005
Description: Hot fluid under pressure.
Refer to Cooling System (Routine
Maintenance Section).
ISO-07D
817-70112-2
Part Number: 817/70112
Description: Crush hazard. Keep a
safe distance from the moving parts.
ISO-09A
332-P4581-1
Part Number: 332/P4581
Description: Severing of hands or
fingers. Keep clear of/do not reach
into the moving parts. Stop the engine
and remove the starter key before you
start maintenance work. Refer to
Making the Machine Safe (Routine
Maintenance Section).
ISO-010A
817-70029-3
Part Number: 817/70029
Description: Crush hazard. Wear the
seat belt when you operate the
machine.
To Next Page
Loading...
Need help?
General
