JDS Uniphase FI Series User Manual

FISERIES LIVE FIBER IDENTIFIER WITH POWER METER 13
Use the included USB cable to connect to a PC/laptop. The device will be automatically
recognized and function as an Optical Power Meter.
Hardware Recognition
USB Optical Power
Meter Software
Software Menus
As a power meter, this device can be used
in conjunction with applications that are
included on the installation disk (FiberChek2
and USB Power Meter). Both programs
display the optical power readings from the
OPM.
• FiberChek2 and FiberChek2 –
QuickView are both programs that
integrate OPM functionality with ber
end-face inspection, analysis and
archiving. Using these programs also
requires a JDSU digital microscope.
Further information on these programs
can be found in the FiberChek2 user
manual.
• The JDSU USB Power Meter software
is a stand-alone OPM program with
dedicated OPM functionality
File > Exit Close JDSU USB Power Meter Program
View Select the desired power measurement (dB, dBm, mW)
Note: Thiscanalsobeselectedfrominthesoftwaredrop-down
menu.
Tools > Options Opens the Options menu
Tools > Log Select various features associated with logging information
Tools > Import Imports saved values that are stored on the OPM to a report log
Open Log Opens Log records saved by user
Start Logging Starts automatic logging based on user established intervals
End Logging End automatic logging
Devices Displays information on the connected OPM
Help > About Provides software and rmware version
Software CHAPTER 3

JDS Uniphase FI Series Specifications

General

Brand	JDS Uniphase
Model	FI Series
Category	Measuring Instruments
Language	English