JDS Uniphase FI Series - Chapter 2 OPERATION; Live Fiber Identifier (LFI)

FISERIES LIVE FIBER IDENTIFIER WITH POWER METER 7
OPERATION
2
1. Turn power ON.
2. Insert ber into Alignment
Groove.
3. Pull the Safe-latch Trigger down
until you hear a clicking sound to
ensure Ambient Light Shield is
securely engaged.
4. If trac is present, an audible
tone will sound and the device
will display “TRAFFIC” on the
top part of the screen.
LIVE FIBER IDENTIFIER
(LFI)
Operation CHAPTER 2
Alignment Groove
Ambient Light Shield
"TRAFFIC" is Present