- 66 -
Operation
- A locking switch prevents accidental operation of the battery breaker control panel. To allow
use of the battery breakers, unlock the locking switch.
- The green light illuminates on the locking switch and on all the battery breaker control
switches. This indicates that control of the battery breakers is enabled.
- Activate the push button of the battery breaker you wish to operate: the red light on the switch
illuminates. This means that the battery isolator is ON (actuated).
- To turn off the battery breaker, press the push button again. When the red light goes out, the
battery breaker is OFF (turned off).
To Next Page
Loading...
