- 69 -
Operation
- The charger runs fully automatically. It can remain permanently connected to the batteries
and does not need to be disconnected when starting the engine.
- In some electrical circuits, there may be battery chargers coupled in parallel.
Maintenance
- Before doing any maintenance, cut the AC supply.
- Regularly vacuum out any dust particles which may accumulate in the charger. An annual
check of the tightness of the nuts and bolts is necessary to ensure the correct operation of the
charger.
From hull no. 3
12 V circuit - Starting - Generator & Engine
start
Power: 25A Location: Passageway - Galley
IT IS IMPERATIVE TO DISCONNECT THE BATTERY CHARGER BEFORE
DISCONNECTING THE BATTERY TERMINALS FOR MAINTENANCE.
8
DC INSTALLATION
To Next Page