2. Pull the carpet out from the front to the rear.
3. Remove the grommets under the front seat. First for
the rear carpet and then the front carpet.
4. Under the back of the front seat, open the carpet
split and then pull out the rear edge and slide the
carpet to the front (do not remove the harness).
5. Finally open the carpet split around seat bracket
and then remove the last two grommets.
6. When reinstalling carpet, perform these steps in
reverse order, making sure that the carpet is tucked
under the scuffs, B-pillar, and console, and then
refasten the grommets.
Rear Carpet
1. Remove the grommets under the front seat (one left
and one right).
2. Then pull the carpet out, to the rear and open the
carpet split around the front seat brackets.
3. Remove the rear Under Seat storage bin
(if equipped), by removing the four bolts that hold it
to the floor.
4. Remove the fastener bin from the rear floor, it is
heldinbyclips.
5. Remove the jack and tools by turning the wing bolt
counterclockwise, remove the wing bolt and then lift
the assembly out from under the seat.
Front Carpet Pulled Away
Front And Rear Carpet Split
Rear Underside Of Front Seat
1 — Harness
2 — Carpet Split
Carpet Split
1—Grommet
SERVICING AND MAINTENANCE 351
8
To Next Page
Loading...
