ENGINE FLUIDS AND LUBRICANTS
GASOLINE ENGINE
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of the manufacturer Material Standard MS.90032.
Engine Oil — 3.6L Gasoline Engine
We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil which meets the
requirements of the manufacturer Material Standard MS-6395. Equivalent full syn-
thetic SAE 0W-20 engine oil can be used but must have the API Starburst trademark
page 310.
Engine Oil Filter
We recommend using a Mopar® Engine Oil Filter. If a Mopar® Engine Oil Filter is
unavailable only use filters that meet or exceed SAE/USCAR-36 Filter Performance
Requirements.
Fuel Selection — 3.6L Gasoline Engine 87 Octane (R+M)/2 Method, 0-15% Ethanol.
DIESEL ENGINE
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of the manufacturer Material Standard MS.90032.
Engine Oil — 3.0L Diesel Engine
We recommend using Mopar® API Certified SAE 5W-40 Full Synthetic Engine Oil which
meets the requirements of the manufacturer Material Standard MS-12991 and API SN
or SP capable. Equivalent full synthetic SAE 5W-40 engine oil can be used but must
have the API Donut trademark
page 310.
Engine Oil Filter
We recommend using a Mopar® Engine Oil Filter. If a Mopar® Engine Oil Filter is
unavailable only use filters that meet or exceed SAE/USCAR-36 Filter Performance
Requirements.
TECHNICAL SPECIFICATIONS 361
9
To Next Page
Loading...
