Operating Temperature
Temperature <-4°F (< -20°C)
-4 to 32°F
(< -20 to 0°C)
32 to 113°F
(0 to 45°C)
115 to 140°F
(46 to 60°C)
>140°F (>60°C)
Speaker state (docked or Direct Current [DC]
plugged in)
OffOnOnOnOff
Speaker state (undocked and running off battery) Off On On On Off
Speaker’s Internal Battery Charging No No Yes No No
The Jeep® wireless speaker contains a lithium-ion rechargeable battery. Typical charging temperatures for these types of batteries are from 0 to 45°C (32 to 113°F).
NOTE:
The functions described are for when the Jeep® wireless speaker is undocked from the vehicle. When plugged into the docking station, the Jeep® wireless speaker functions as
part of the vehicle’s sound system.
Phone & Bluetooth® Pairing
A feature of the Jeep® wireless speaker is the ability for
the Jeep® wireless speaker to connect to devices using
Bluetooth®. Follow these simple steps to connect a
Bluetooth®-enabled device to the Jeep® wireless
speaker:
1. Press and hold the power button for 2-3 seconds to
turn the Jeep® wireless speaker on.
2. Turn “on” Bluetooth® for the device you desire to be
connected to the Jeep® wireless speaker. For
instructions on how to turn on and off Bluetooth®
settings for the desired device, refer to the device’s
user manual.
3. When powered on, the Jeep® wireless speaker will
automatically enter pairing mode. To pair a second
device, press and hold the Bluetooth® button for
2-3 seconds, until an audio cue is heard. Then go to
the devices’ Bluetooth® settings and select “Jeep®
Speaker” from the list.
The Jeep® wireless speaker will remember the last
eight devices it has paired with.
NOTE:
If the Jeep® wireless speaker is left on with an inactive
Bluetooth® connection for 30 minutes, it will automati-
cally turn off. The Jeep® wireless speaker can be
turned on again by pressing and holding the power but-
ton for 2-3 seconds.
Resetting Your Jeep® Wireless Speaker
To reset the Jeep® wireless speaker to its original fac-
tory setting, press and hold the reset button under the
back cover for 8-10 seconds.
Speakerphone
The speakerphone feature can be used by pressing the
“Voice Control” button on the Jeep® wireless speaker.
This feature can be used to answer and end calls over
the speakerphone.
Volume And Playback Control
Volume can be increased or decreased by briefly press-
ing the + button or - button. When the maximum vol-
ume is reached, an audio cue will sound.
To skip to the next track, press and hold the + button.
To go to the previous track, press the - button.
Qualcomm TrueWireless™ Stereo
A feature of the Jeep® wireless speaker is being able to
pair two Jeep® wireless speakers together for Qual-
comm TrueWireless™ Stereo. This feature allows for two
Jeep® wireless speakers to play left and right stereo
sound.
64 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
