5. Roll the Tonneau Cover rearward toward the back of
the truck bed.
6. Position both Tonneau Cover latches over the lock-
ing mechanisms (one on each side of the truck
bed), making sure the plastic retainer is correctly
seated in the forward part of the latch.
7. Once the rear Tonneau Cover bar is positioned over
the locking mechanism, grab the back of the Ton-
neau Cover and push downward on the center to
engage the locking mechanisms. Make sure an
audible “click” from both sides of the Tonneau Cover
is heard to confirm that the latch is completely
engaged.
NOTE:
If desired, the Tonneau Cover can be left in this
position (rear panel folded forward) while the tail-
gate is closed, or the tailgate can be raised to the
mid-position
page 93.
8. Fold the rear panel down; the tailgate can now be
raised and secured in place.
Release Stowage Strap
Roll Tonneau Cover Rearward
Correctly Seated Retainer
Incorrectly Seated Retainer
Push Downward To Lock
Tonneau Cover With Tailgate In Mid-Position
96 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
