NOTE:
•
Depending on the vehicle’s options, feature settings
may vary.
•
All settings should be changed with the ignition in
the ON/RUN position.
When making a selection, only press one button at a
time to enter the desired menu. Once in the desired
menu, press and release the preferred setting option
until a check mark appears next to the setting, showing
that setting has been selected. Once the setting is com-
plete, press the X button on the touchscreen to close
out of the settings screen. Pressing the Up or Down
Arrow button on the right side of the screen will allow
you to toggle up or down through the available settings.
Language
When the Language button is pressed on the touchscreen, the system displays the different language options. Once an option is selected, the system will display in the chosen
language. The available setting is:
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name Description
Language This setting will change the language of the Uconnect system and Instrument Cluster Display. The available languages are
“English”, “Français”, and “Español”.
MULTIMEDIA 167
5
To Next Page
Loading...
