Lowering The Soft Top Into The Sunrider® Position:
Use this QR code to access your digital
experience.
1. Fold both sun visors forward against
the windshield.
2. Release the header latches from the
crossbar by pulling the handle down-
ward. Make sure the hook is fully disengaged from
its receiver.
3. From both the left and right sides, lift up on the
#1 Bow of the soft top to begin the operation. It is
recommended to utilize two people for this
procedure.
4. Move to the side of the vehicle and use the side link
to fold the soft top rearward.
5. Secure the top in this position by using the two
hook-and-loop fasteners provided in the center
console.
NOTE:
The vehicle can be driven in the Sunrider® Position
with the rear window and quarter panel cover assem-
blies fully installed or completely removed.
CAUTION!
Quarter panel cover assemblies and rear window
must be either all in or all out.
Scan me
Step Two
Step Three
Step Four
Step Five
GETTING TO KNOW YOUR VEHICLE 73
2
To Next Page
Loading...
