Jeep UNIVERSAL CJ-2A - Page 92

'Jeep' UNIVERSAL and 'Jeep' DISPATCHER
E-114. F4-134 ENGINE SPECIFICaTIONS (Continued)
MODEL:
VALVE SYSTEM: (Continued)
Timing:
Intake:
Opens ........................... .
Closes ........................... .
Duration ......................... .
Exhaust:
Opens ........................... .
Closes
........................... .
Duration ......................... .
Valve Opening Overlap .............. .
Valves:
Intake:
Material. ....................... .
Length Over All . . . . . . . . . . ....... .
Head Diameter ................... .
Angle of Seat ..................... .
Stem Diameter ................... .
Stem-to-Guide Clearance ........... .
Lift ..................... ·.·.·····
Exhaust:
Material ......................... .
Length Over All .................. .
Head Diameter ................... .
Angle of Seat ............... .
Seat Insert Material ............... .
Stem Diameter ................... .
Stem-to-Guide Clearance ........... .
Lift .................... .
Springs:
Intake:
Free Length ................... .
Standard:
Pressure @ Length;
Valve Closed ....... .
Valve Open ... .
Service Minimum:
Pressure @ Length;
Valve Closed .. .
Valve Open .... .
Exhaust:
Free Length .......... .
Pressure @ Length:
Standard:
Valve Closed .... .
Valve Open .... .
Service Minimum;
Valve Closed ... .
Valve Open .... .
LUBRICATION SYSTEM:
Type of Lubrication:
Main Bearings ...... .
Connecting Rods ..
Piston Pins ......... .
Camshaft Bearings.
Tappets .......... .
Timing Gears ................... .
Cylinder Walls ..... .
Oil Pump:
Type ................ .
Drive ................. .
Minimum Safe Oil Pressure:
At Idle ................ .
At 2000 rpm. (35 mph.)... . .. ,
Relief Valve Opens.............. . I
Normal Oil Pressure............ . . ·I
Oil Pressure Sending Unit. . . . . . . . . . . . 1
Oil Intake ............................ i
Oil Filter System. . . . . . ............. ·1
CJ-3B, CJ-5, CJ-6
9° BTC
50° ABC
239°
47°
BBC
12° ATC
239°
21°
SAE 5150
4.781,
2"
45°
.3733" to .3738"
.0007, tci .0022,
.260"
Uniloy 21-12
5.909"
1.47"
45°
Eatonite EMS 58
.371" to .372"
.0025" to .0045"
. 351,
1.97"
73 lb. @ 1.66"
153 lb. @ 1.40,
66 lb. @ 1.66,
140 lb. @ 1.40,
2Yz"
53 lb. @ 2.109,
120 lb. @ 1.750,
471b.@ 2~4"
110 lb.@ 1%"
Pressure
Pressure
Splash
Pressure
Splash
Nozzle
Nozzle
Internal Rotor
Camshaft Gear
6 psi.
20 psi.
40 psi.
35 psi. @
2000 rpm.
Electric
Floating
Partial Flow
METRIC
12,14 mm.
50,8 mm.
9,481 a 9,494 mm.
0,0178 a 0,0559 mm.
6,604 mm.
150,089 mm.
37,34 mm.
9,423 a 9,449 mm.
0,0635 a 0,1143 mm.
8,915 mm .
50,00 mm.
33,1 kg. @ 86,7 mm.
69,4 kg. @ 35,7 mm.
29,9 kg. @ 86,7 mm.
63,5 kg. @ 35,7 mm.
63,5 mm.
24 kg. @ 53,5 mm.
54,3 kg. @ 44,4 mm.
21,3 kg. @ 53,5 mm.
49,9 kg. @ 44,4 mm.
0,4 kg·cm
2
1,4 kg-cm2
2,8 kg-cm2
2,4
kg·cm2 @ 2000 rpm.
E
91