PO BOX 7231, COLORADO SPRINGS, COLORADO 80933 USA E-mAIL: jRDG@jEffROwLAND.COm www.jEffROwLAND.COm TELEPHONE (719) 473-1181
16
B ADC
Please strictly follow the following steps in
order before operating your CONCERTO
Stereo Preamplifier.
WARNING: If the unit is plugged into a voltage
different from the range listed on the back
panel, serious damage to internal circuitry will result
and will void the warranty.
STEP 1:
Verify that the VOLTS AC input
(A) identified on the rear panel near the AC input
socket is the same as the AC mains voltage in your area.
STEP 2: Install the AC Power Cable into the AC input connector (B) between the preamplifier
and your AC mains outlet.
STEP 3: Turn on the master
AC power switch (C).