3
• Two pairs XLR input connectors for
balanced system congurations.
• Three pairs RCA input connectors for
unbalanced system congurations.
• Two pairs of parallel, high-current,
balanced line level preamplier outputs
to allow driving of external ampliers,
subwoofers, zones, etc.
• Fully-balanced transformer-coupled
inputs provide
universal compatibility
with other
components and eliminate
ground loop noise and EMI.
• Fully-balanced circuit topology
implemented on all inputs and outputs.
• Bypass function allows for transpar-
ent use in combination audio/home
theater systems.
• Regulated, high-current, linear power
supply provides stable operating volt-
age with the lowest possible noise and
distortion artifacts under all operating
and line conditions.
• Low power consumption permits
constant power-up operation to
eliminate warm-up time.
• Optical encoder type volume control
maintains quiet, trouble-free perfor-
mance and accuracy over the entire
lifetime of the product.
• Dual range volume control allows
large volume level changes when
knob is rotated abruptly, yet allows
small, precise volume level changes
when knob is rotated slowly.
• Six function, hand-held infrared
remote transmitter.
• Ultra-low resonance, structurally
rigid chassis,
precision-machined
from a solid block of aircraft grade
6061-T6 aluminum.
• Optional plug-in phono cards
(installed internally) convert Line
Input 2 to high performance phono
inputs. Three gain and loading
options can accommodate moving
magnet (MM), moving coil (MC)
cartridge types and high output
moving coil cartridge types.
To Next Page
Loading...
Need help?
General
