To Next PageTo Next PageWhat to do if my Jenn-Air JDS8850BDS surface burner fails to light?
If the surface burner on your Jenn-Air range doesn't light, first ensure the unit is properly connected to the power supply. Check for a blown circuit fuse or tripped circuit breaker. Make sure the ignitor is dry and clicking. Note that the burner will not light if the ignitor is damaged, soiled, or wet. If the ignitor doesn’t click, turn the control knob OFF.
What to do if my Jenn-Air JDS8850BDS oven will not self-clean?
If your Jenn-Air oven won't self-clean, check that the cycle isn't set for a delayed start and that the door is fully closed. Make sure the control is not in Sabbath Mode. Also, the oven temperature must be below 400°F to start a cleaning cycle.
What to do if my Jenn-Air JDS8850BDS food is not broiling properly?
If food isn't broiling correctly or is smoking too much, check the oven rack positions. Avoid incorrect use of aluminum foil. Trim excess fat from meat before broiling. Ensure you are not using a soiled broiler pan. Preheat the oven for 2-3 minutes before putting food in. Broil with the oven door closed.
What to do if my Jenn-Air JDS8850BDS oven door will not unlock after self-clean cycle?
If the oven door remains locked after a self-clean cycle, allow about one hour for the oven to cool down. Also, check that the control and door are not locked.
What to do if my Jenn-Air Ranges oven did not clean properly?
If your Jenn-Air oven didn't clean well enough, a longer cleaning time may be needed. Also, excessive spillovers, especially sugary or acidic foods, should be removed before starting the self-clean cycle.
Why is my Jenn-Air JDS8850BDS Ranges clock operating but oven does not heat?
If the clock and lights are on but the oven isn't heating, the oven may be set for a Cook & Hold or delay function. The control lock may also be activated.
What does fault code mean on Jenn-Air JDS8850BDS Ranges?
The oven may detect a fault during programming or operation. If so, a message like 'FAULT DETECTED - PRESS POWER TO CLEAR' or 'FAULT DETECTED - PRESS ENTER TO TRY AGAIN' may appear. If the same operation is attempted before repair, 'FEATURE NOT AVAILABLE' will show. Excessive flare-ups from a heavily soiled oven during cleaning can also cause a fault code.
What does it mean when there are no beeps on Jenn-Air JDS8850BDS?
If there are no beeps and no display on your Jenn-Air range, the oven may be in Sabbath Mode.
What to do if my Jenn-Air JDS8850BDS Ranges baking results are not as expected?
If your baking results aren't what you expect, verify the selected oven temperature. If the recipe requires preheating, make sure to preheat the oven. Ensure that the oven vent is not blocked and that the range is level. Keep in mind that temperatures can vary between new and old ovens. Also, confirm you are using the correct pan, rack positions, pan placement, and foil usage in the oven.
Why is my Jenn-Air Ranges flame uneven?
An uneven flame on your Jenn-Air range may be due to clogged burner ports.
General| Brand | Jenn-Air |
|---|---|
| Model Number | JDS8850BDS |
| Product Type | Range |
| Fuel Type | Dual Fuel |
| Range Type | Freestanding |
| Cooktop Type | Gas |
| Number of Burners | 5 |
| Max Burner Output | 20, 000 BTU |
| Self-Cleaning | Yes |
| Convection Oven | Yes |
| Griddle | No |
| Wi-Fi Connectivity | No |
| Color | Stainless Steel |
| Width | 30 inches |
| Weight | 300 lbs |
| Warranty | 1 Year Limited |
| Burner Types | Sealed |
| Height | 36 inches |
Identifies warning symbols like DANGER, WARNING, CAUTION, and their meanings.
Details precautions to avoid fires, including keeping areas clear and handling flammable materials.
Explains immediate actions to take in case of a cooktop or oven fire.
Advises on keeping children safe around the appliance, preventing climbing and unsupervised use.
Covers important usage rules, like not using the oven as a heater or blocking vents.
Essential advice for safe cooking, including burner use, unattended operation, and handling hot fats.
Specific cautions for handling hot grease during deep frying.
Important warnings and procedures before, during, and after using the self-clean cycle.
Details on setting up and operating the self-clean cycle for different soil levels.
Instructions on how to program a delayed start for the self-cleaning function.
Steps to prepare the oven interior and racks before starting the self-clean cycle.
Lists common problems like appliance not working, no heat, or burner issues with solutions.
Solutions for oven not self-cleaning, improper cleaning, door lock issues, or no display.
How to use surface controls, including flame adjustment and pilotless ignition.
How to set the Bake function, including Cook & Hold and Delay Bake options.
Introduction to convection cooking, its benefits, and automatic conversion settings.
Overview of Convect Bake, Convect Roast, and Convect Pastry modes.
How to operate the warming drawer for keeping food warm and warming plates or breads.
How to set the Broil function, including high/low settings and variable broil temperatures.
How to program Cook & Hold and Delay for baking, convection, and self-clean cycles.
How to use Keep Warm for foods, dinner rolls, and plates, with time recommendations.
Steps for using the meat probe to ensure accurate internal food temperatures for roasting.
How to use the oven for drying foods, including door adjustment and temperature settings.
Details the first year's warranty coverage for parts and labor against defects.
Covers specific component parts from the second through fifth year after purchase.
