To Next Page

To Previous Page

CAR910X

Power On/Off

Volume

Mute

Mode

Main Menu

A/V In

USB

Reset

Momentarily press to turn the unit on. Press and hold to turn the

unit off.

Rotate the volume knob to increase or decrease the volume level.

Momentarily press MUTE to silence the audio. Momentarily press MUTE

again to return to the previously selected volume. Rotating the volume

knob while the volume is muted will also cancel the mute function.

Press MODE at the top left corner of the screen to display the main

menu.

Radio/USB/SXM/BT Phone/Android Auto/CarPlay/AV In/BT Audio/

Equalizer/Settings

Note: Modes of operation can also be accessed by selecting the

corresponding icon from the main menu.

Operation Mode Selection: Press the icon at the top left corner of the

screen to display the OSD main menu. Press the Radio/USB/SXM/BT

Phone/Android Auto/CarPlay/AV In/BT Audio/Equalizer/Settings in the

Main meu pate to select the desired source.

Connect external audio/video devices to the rear RCA Type A/V Input

Insert a USB flash drive to play MP3/FLAC/MP4 files.

To resolve abnormal operation or if the unit is inoperable, Press the

RESET button located behind the front panel directly under USB port.

The unit will reset the main processor to the default settings.

Note: Use the tip of a pen to access the reset button. To restore the

factory default software settings.

General Operation

Jensen CAR910X User Manual

Questions and Answers: