JENSEN
JA
SERIES
Preparation
Please read entire manual before installation.
Due
to the technical nature
of amplifiers. it is highly recommended that your amplifier is installed
by
a
professional installer
or
an
authorized dealer.
Before
You
Start
• Disconnect negative battery terminal. (consult a qualified technician for
instructions)
• Avoid installing the amplifier where it would
be
subject to high temperatures. such
as from direct sunlight.
or
where it would
be
subject to dust. dirt
or
excessive
vibration.
•
Use
extreme caution when drilling holes
to
avoid damaging fuel lines
or
existing
vehicle wiring.
• All amplifier installations require power. signal and speaker wires (not included).
• An amplifier installation kit (sold separately) is highly recommended to facilitate
the installation. Consult your dealer for recommendations.
Mounting
Location
• Choose a mounting location for the amplifier. Suggested locations include under a
seat
or
in the trunk.
•
The
amplifier
can
be
mounted horizontal (recommended)
or
vertical. For optimum
performance. make sure to provide at least 1" of space around all sides.
Do
not
mount the amplifier under carpets
or
where airflow is restricted.
•
Do
not install the amplifier where it may
be
exposed to moisture.
•
The
optimum mounting location varies between vehicles. Remember
to
test all
amplifier functions before completing the final mounting procedure.
TYPICAL
MOUNTING
MEJ"HOD
1
To Next Page
Loading...
