How to fix a Jensen JRV215N Car Video System that has no power?
If your Jensen Car Video System won't power on, ensure the vehicle's ignition is switched to “ACC” if the power supply is properly connected to the vehicle accessory terminal. Also, check the fuse and replace it if it's blown.
Why is there no sound coming from my Jensen Car Video System?
If there's no sound from your Jensen Car Video System, first, check the volume level and adjust it if it's too low. Then, access the Audio Setting menu to ensure the Fader settings are correctly configured. Also, verify that all wiring connections are secure. Finally, make sure that Mute is turned off, and if you're in camera mode, ensure the Camera Mic is also off.
What to do if my Jensen Car Video System sound skips?
If your Jensen Car Video System skips sound, it might be due to the installation angle being more than 30 degrees. Adjust the installation to be less than 30 degrees. Alternatively, the disc might be dirty or defective. Try cleaning the disc or using a new one.
Why does my Jensen JRV215N Car Video System radio automatically switch to WB (Weather Band)?
If your Jensen Car Video System radio automatically switches to WB (Weather Band), this is a normal function when a Weather Band warning is being received. If you do not want this to occur, set the WB Alert setting to “Off” in the System Setup menu.
Why does my Jensen Car Video System radio automatically turn on and tune to WB (Weather Band)?
If your Jensen Car Video System radio automatically turns on (ignition on) and tunes to WB (Weather Band), this is a normal function when the Alert Power feature is set to “On” in the System Setup menu due to a Weather Band warning. To prevent this, set the Alert Power setting to “Off” in the System Setup menu.
Why can't my Jensen Car Video System tune to radio stations?
If your Jensen Car Video System cannot tune to a radio station or auto-seek isn't working, make sure the antenna cable is firmly inserted. If the signals are too weak, select a station manually.
What to do if the operation keys on my Jensen JRV215N do not work?
If the operation keys on your Jensen Car Video System don't work, the built-in microcomputer might not be operating properly due to noise. Press the RESET button.
Why does my Jensen Car Video System radio mute when the car is in reverse?
If your Jensen Car Video System radio mutes audio when the vehicle is in reverse gear, this is a normal function. If the camera has a microphone, the camera audio will be played when in reverse gear.
What to do if my Jensen Car Video System won't load or eject discs?
If your Jensen Car Video System won't load or eject a disc, consider these possibilities: 1. If there is already a disc inside, remove it before inserting a new one. 2. Ensure you're inserting the disc with the label facing upward. 3. The disc might be dirty or defective; clean it or try a new one. 4. If the temperature inside the vehicle is too high, wait until it returns to normal. 5. Condensation may be present; leave the player off for about an hour, then try again.
General| Brand | Jensen |
|---|---|
| Model | JRV215N |
| Category | Car Video System |
| Language | English |
Legal information, copyrights, and trademarks.
Important safety precautions for operating the device.
Explains how the system determines vehicle location using GPS.
Details the map database used for navigation.
Agreement required before using navigation software.
Essential rules for safe operation to prevent accidents.
Lists compatible disc types and their maximum play times.
Guidelines for cleaning and maintaining discs.
Initial steps before installation, like disconnecting the battery.
Key considerations for proper installation and operation.
Instructions for mounting the unit in a 2-DIN dashboard opening.
Lists components included for installation.
Steps to reconnect the battery after installation wiring.
Instructions for safely uninstalling the device.
Visual representation of all electrical connections.
Details the function of each pin on the unit's connector.
Configuration for installing three cameras.
Configuration for installing a single rear camera.
How to mute and unmute audio output.
Steps to turn the unit on and off.
How to adjust the audio volume level.
Procedure to reset the unit to factory settings.
How to access and navigate the main menu.
Accessing the navigation system.
Accessing and managing camera inputs.
Steps to set the date and time on the unit.
Adjusting display brightness and standby clock.
Options for general settings like wallpaper and region.
Overview of available settings menus.
Adjusting time format and synchronization.
Adjusting dimming, display, and calibration.
Adjusting volume, EQ, beep tone, and subwoofer.
Configuring camera input and trigger priority.
Setting the priority for camera activation.
Setting delay for camera image display after trigger.
Enabling or disabling audio for the rear camera.
Configuring weather alerts and SAME codes.
How to access the AM/FM tuner.
Ways to seek and tune radio stations.
Storing and recalling favorite radio stations.
Using RBDS to search for specific program types.
Information on FM stereo signal reception.
Explains the NOAA Weather Radio/Weatheradio Canada service.
How to select weather band frequencies.
Automatic switching to weather band during alerts.
Using SAME codes to filter weather alerts.
Inserting, ejecting, and controlling DVD playback.
Inserting, ejecting, and controlling CD/MP3 playback.
How to play tracks in random order.
Browsing and selecting files from a list.
Overview of SiriusXM service and requirements.
How to enter SiriusXM mode and access the interface.
How to find and use your SiriusXM Radio ID.
Steps to activate the SiriusXM tuner.
Navigating the SiriusXM radio interface.
How to tune channels and store presets.
How to tune to a specific channel.
How to find channels by music genre.
How to lock and unlock SiriusXM channels.
Procedure to unlock channels using a passcode.
How to change the parental control passcode.
Steps to reset the SiriusXM channel lock code to default.
Troubleshooting for antenna connection issues.
Troubleshooting for tuner communication problems.
Solutions for receiving satellite signal issues.
Information regarding subscription status changes.
What to do when a channel is not valid or available.
Information for channels not included in subscription.
Explanation for channel lock and how to access.
Prompt to enter the lock/unlock code.
Handling incorrect unlock code entries.
How to choose playlists from your iPod.
Basic playback controls for iPod.
Navigating and selecting songs.
How to pause and resume iPod playback.
How to repeat tracks or the entire disc.
How to play tracks in random order.
Accessing audio adjustments for playback.
Overview of Bluetooth capabilities and profiles.
Step-by-step guide to pair your mobile phone.
Navigating the Bluetooth menu and options.
Handling incoming calls via Bluetooth.
How to make outgoing calls using the keypad.
Viewing call history (answered, dialed, missed).
Viewing and dialing from the list of outgoing calls.
Accessing and using the phonebook contacts.
Streaming music via Bluetooth (A2DP/AVRCP).
Managing paired devices and Bluetooth settings.
Operating DVD/VCD playback in Zone 2.
Operating AUX 1/AUX 2 inputs in Zone 2.
How to access the camera input screen.
Connecting and triggering cameras.
Muting audio for camera microphone input.
Adjusting audio for camera and other sources.
On-screen controls for camera view and settings.
Detailed list of remote control button functions.
Guidelines for keeping the unit clean and dry.
Understanding and suppressing ignition noise.
Factors affecting radio reception and interference.
Table of common issues and their solutions.
Technical details for CD and DVD playback.
Technical details for video output and input.
Technical details for FM radio reception.
Technical details for AM/MW radio reception.
General technical specs like voltage and dimensions.
To Next Page
