What to do if my Jensen JTA-300 Turntable doesn't turn on?
If your Jensen Turntable isn't powering on, there are a few things you can check: * Ensure the AC power cord is properly plugged into both the wall outlet and the power supply jack on the back of the unit. * Verify the wall outlet is functioning by plugging another device into it. * Make sure the POWER switch is in the ON position by rotating it clockwise.
Why is the volume low on my Jensen JTA-300?
If your Jensen Turntable is on but the volume is low or nonexistent, the volume control might be turned all the way down. Try adjusting the Volume control to a higher output level.
How to fix distorted sound on Jensen Turntable?
If the sound from your Jensen Turntable is distorted, the volume level might be set too high. Try decreasing the volume to see if that resolves the issue.
Instructions for connecting the power cord to the unit and outlet.
General| Platter Material | Aluminum |
|---|---|
| Built-in Speakers | Yes |
| USB Recording | Yes |
| Built-in Preamp | Yes |
| Power Supply | AC Adapter |
| Type | Belt Drive |
| Speeds | 33 1/3, 45 RPM |
| Outputs | RCA Line Out |
| Connectivity | USB, RCA |
To Next Page
